LED lighting uses far less energy, lasts far longer and turns on instantly, with better color and fewer service calls. Here’s what converting really means for your home or business, backed by real numbers and an honest look at the trade-offs.
Less energy than incandescent bulbs
U.S. Dept. of Energy
Longer life than incandescent bulbs
U.S. Dept. of Energy
Warm-up. Metal halide can take 1–15 minutes
Lighting Research Center
More light, same energy, on our Winn-Dixie retrofit
Empire Electric project
LEDs turn more of their power into light and less into wasted heat, so the same light costs far less to run.
Quality LED fixtures are commonly rated for 50,000 hours or more, compared with roughly 5,600 to 20,000 hours for typical metal halide lamps.
Fewer burned-out lamps means fewer lift and bucket truck visits, which is often where LED pays back fastest.
Full brightness the moment they’re switched on, even right after a power blip. No warm-up, no restrike delay.
Whiter, more natural light makes colors, faces and details easier to see, which helps safety and security cameras.
LEDs are directional, so fixtures put light on the ground or work surface instead of into the sky or next door.
LEDs dim smoothly and switch on and off without wear, perfect for occupancy sensors, daylight dimming and schedules.
Unlike fluorescent and metal halide lamps, LEDs contain no mercury, making disposal simpler.
Metal halide lights can take minutes to reach full brightness. After even a brief power blip, they have to cool down before they’ll restart, which can leave a parking lot or warehouse dark for up to 20 minutes.
LEDs come back on instantly. Try it: turn both lights on, then simulate a power blip.
Time is sped up for the demo: each second here stands for about a minute. Metal halide warm-up (1–15 minutes) and restrike (up to 20 minutes) ranges from the Lighting Research Center.
Choose your current fixtures and adjust the numbers to match your property. Then let us confirm it with a free lighting assessment.
Pick what you have now, adjust the numbers to match your site, and see your estimated savings. Results update as you type.
Planning estimate for energy only, based on 365 days a year. It doesn't include maintenance savings from fewer lamp replacements, which are often significant. Typical wattages are starting points; your fixtures may differ.
Choose an area to see how we handle LED conversions there.
Replace failing metal halide poles with brighter, even LED light.
LED high bays with sensors for aisles, docks and production floors.
Swap fluorescent troffers for LED panels with smooth dimming.
LED wall packs, floods and canopy lights that cut glare and service calls.
Convert neon and fluorescent signs to bright, even LED.
Recessed, outdoor and security lighting that’s efficient and long-lasting.
LED is the right choice for most properties, but not every LED product or project is equal. Here’s what to watch for.
LED fixtures cost more to buy than lamps for older systems. The payoff comes from energy and maintenance savings over time, which is why we price it out first.
LEDs last only as long as their electronics and heat management allow. Cheap fixtures fail early, so we install quality, listed fixtures with solid warranties.
Very cool, blue-white LEDs can feel harsh and add glare and light pollution outdoors. We help you choose a color temperature that fits the space.
LEDs don’t usually burn out suddenly. They slowly lose brightness, and their rated life (L70) is when output reaches 70% of new. We design for that.
We count fixtures, note wattages and hours, and check the condition of existing wiring.
We recommend fixtures or retrofit kits and estimate your energy and maintenance savings.
You get a written, flat-rate price before work begins.
We install with minimal disruption, using our bucket trucks for high work.
Sensors, timers and dimming set so you get the full savings.
Old lamps are handled properly and we walk you through the results.
It depends on what you’re replacing. The U.S. Department of Energy says LEDs use at least 75% less energy than incandescent bulbs. Savings over fluorescent and metal halide are smaller but still significant. Try the calculator above with your own numbers.
Quality LED fixtures are commonly rated for 50,000 hours or more to L70, the point where light output falls to 70% of new. The DOE says LEDs last 25 times longer than incandescent bulbs.
Retrofit kits can work well when existing fixtures are in good shape. Full fixture replacement is often better for aging or damaged fixtures and for parking lots and high bays. We’ll recommend the best fit.
For most commercial properties, yes. Lower energy use and far fewer lamp replacements usually pay back the difference. We’ll show you the numbers before you decide.
Usually, and better than older lamps. LEDs switch and dim without wear. We make sure fixtures and controls are compatible.
Yes. We convert neon and fluorescent signs to LED for brighter, more even light and fewer repairs.
Call or request a free lighting assessment online. We’ll estimate your savings and give you a written, upfront price before any work begins.
(904) 365-7777
service@empireelec.com
5810 Macy Ave, Jacksonville, FL 32211
Mon–Fri, 8:00 am–4:00 pm · 24/7 emergency service